Table CNC Plasma And Flame Cutting Machine

Low cost table cnc plasma cutting machine An economical plasma cutting machine which gives full power in a small area. With large table 2060, you will get high precision cut quality at low price. Thanks to the space saving, compact construction, the machine can be quickly installed. Leveling screws makes easy alignment on a flat surface. Bilateral longitudinal drives with precision guiding systems maintain accuracy over long periods of use. With the easy to use Fangling F2100T means your only three clicks away for loading the program to begin cutting. The free-standing console keeps sensitive electronics away from the heat and dust of cutting.

1. The machine can be disassembled,the packaging is simple,and it is easy to transport.

2. Cutting graphics:programmable cutting line and arc constitute any plane shape parts

3. Language:Support 19 languages

Technical Specification
Model	JX-T1530D	JX-T2060D
Effective cutting range(mm)	1500×3000mm	2000*6000mm
Cutting speed (mm/min)	50-8000
Input power source	380v±10% VAC,50/60HZ,three phase
Input Machine body	220V±10%V AC, 50/60HZ, Single phase
Plasma cutting thickness(mm)	0.5-30mm (According to your plasma power source)
Plasma cutting gas	compressed air
Cutting torch	one plasma cutting torch with plasma power source
CNC controller system	F2100T
THC	Build-in controller
Motor	Leadshine Stepper motor and drive
Drive type	Bilateral drive
Operation precision	±0.2mm
Guide length ×guide width ×guide thickness (mm)	3500×273×60
Nesting software	StarCam or Fastcam
Gas pressure (Mpa)	0.5

(1) Welded thick-walled steel structure, after special treatment, no distortion for the whole structure high precision, and long service life time.

(2) Cutting system use Shanghai FLMC-2300A; Equipped with automatic height controller (THC controller), which can according to your material planeness, cutting head can automatically stable, and fast adjust.

(3)Suitable software: Fastcam/ Starcam etc.

(4) FASTCAM programming software based on AutoCAD automatic programming and material system.

(5) FASTCAM is designed for all kinds of NC cutter with cutting software, the software can help the user completing various complex parts drawing, programming, material, using convenient, also bring the obvious economic benefit.

(6) If you cut thick material, according to actual use, we’ll add water tank for you for free, to absorbs a large amount of smoke generated during cutting.

(7) Machine could be customized, whatever specifications, appearance, etc. Any request you’ve, could tell us directly.

1. Taiwan HIWIN linear rail, ensure vertical section, more precision.

2. Cutting graphics:programmable cutting line and arc constitute any plane shape parts

3. Language:Support 19 languages

Technical Specification
Model	JX-T1325H	JX-T1530H	JX-T1560H
Effective cutting range(mm)	1300*2500mm	1500×3000mm	1500×6000mm
Machine size (mm)	1950*3750mm	2150×4250 mm	2150×7250 mm
Cutting speed (mm/min)	50-10000
Input power source	380v±10% VAC,50/60HZ,three phase
Input Machine body	220V±10%V AC, 50/60HZ, Single phase
Plasma cutting thickness(mm)	0.5-40mm (According to your plasma power source)
Torch height controller	F1628
Plasma cutting gas	compressed air
Cutting torch	One plasma cutting torch with plasma power source
CNC controller system	F2300A
Motor	Servo motor and drive
Operation precision	±0.2mm
Guide length ×guide width ×guide thickness (mm)	3500×273×60
Nesting software	StarCam or Fastcam
Gas pressure (Mpa)	0.5
Arc	Untouched arc striking
Processing Materials	Iron, Steel, Aluminum sheet, Galvanized sheets, Titanium Sheets

CNC cutting machine is to use a digital program-driven machine motion, when the machine moving, torch cutting metal plate, can cut out any flat shape parts. CNC flame cutting machine is mainly used in large thickness steel cutting. CNC plasma cutting machine can cut all kinds of metal sheet metal, cutting speed, high efficiency, kerf smooth, needn’t polishing, operation simple, energy-saving, less noise. Widely used in automobiles, motorcycles, pressure vessels, chemical machinery, general machinery, engineering machinery, steel construction and other industries.

1. Adopt advanced professional industrial control technology, LCD display with 7 inches’s high resolution ration lattice. It’s cutting method and performance, just as the gantry type cutting machine, can cut the arbitrary and complicated plane figure. It reduces the second process and the producing cost, improving material utilization and the labor productivity;

2. Support USB connection, making the document transferring conveniently and software upgrade;

3. Rich basic graphics, also provide software to convert CAD files G-code, then lead in machine.

Technical Specification
Model	JX-1212	JX-1530
Effective cutting range(mm)	1200*1200mm	1500×3000mm
Cutting speed (mm/min)	50-4000(max. 4000)
Input power source	380v±10% VAC,50/60HZ,three phase
Input Machine body	220V±10%V AC, 50/60HZ, Single phase
Flame Cutting thickness (mm)	6-80 (Oxygen + acetylene or propane)
Plasma cutting thickness(mm)	0.5-30mm (According to your plasma power source)
Flame cutting gas	Oxygen+ propane or acetylene
Plasma cutting gas	compressed air
Cutting torch	One piece flame cutting torch and one plasma cutting torch with plasma power source
CNC controller system	F2100T
Motor	Leadshine Stepper motor and drive
Operation precision	±0.2mm
Guide length ×guide width ×guide thickness (mm)	3500×273×60
Nesting software	StarCam
Gas pressure (Mpa)	0.5
Cutting tool Conversion Kit	Oxygen(flame) and plasma cutting machine spare parts can change easily.